Classification of Matter (2018) Self study module. You are expected to have notes, log time and answer the questions to complete this module.
By Cindy King
starstarstarstarstarstarstarstarstarstar
Last updated over 4 years ago
51 Questions
THIS IS A SELF STUDY UNIT:
THIS IS FOR A SIGNIFICANT GRADE:
This will take more than one day......BUT you do NOT want to waste day one
You will be asked to take some notes as you proceed through this.
Start off looking at this I can statement to help guide you as to what is your
objective for the next couple of days.
Please make sure that you have an example of each of these in your notes which will be checked later. Do your notes reflect the difference between a mixture, a molecule, and an element?
NEXT: YOU SHOULD SPEND the next 20-30 minutes watching the video and reading over the slide presentation both below. If you choose to go on without doing so then you will most likely not understand how to complete the remainder of the assignment and will do so with little or NO understanding.
Properties and classification of Matter video and slide show
BELOW is a Summary of our chapter from the text book regarding this unit. It contains
almost everything you need yet nicely summed up!! PAGE 1 IF you feel this information is lacking GET A TEXTBOOK. They are underneath the chalkboard in the cabinets. Return the book when you are done with it.
Anything in the 2 pages below is quiz worthy. If there are things you did not already know... then write it down into your notes. Trust me!!!
1
1.
An element is a substance that can not be ___ into simpler substances.
An element is a substance that can not be ___ into simpler substances.
1
2.
A compound always contains 2 or more elements joined in a fixed ___.
A compound always contains 2 or more elements joined in a fixed ___.
1
3.
In a heterogeneous mixture, the parts of the mixture are noticeably ____ from one another.
In a heterogeneous mixture, the parts of the mixture are noticeably ____ from one another.
1
4.
A homogeneous appears to contain only _____ substance.
A homogeneous appears to contain only _____ substance.
1
5.
Based on the _____ of it's largest particles, a mixture can be classified as a solution, a suspension, or a colloid.
Based on the _____ of it's largest particles, a mixture can be classified as a solution, a suspension, or a colloid.
1
6.
A ____ forms when substances dissolve and form a homogeneous mixture. (Remember a solution consist of a solvent and a solute)
A ____ forms when substances dissolve and form a homogeneous mixture. (Remember a solution consist of a solvent and a solute)
1
7.
This homogeneous mixture will separate into layers over time.
This homogeneous mixture will separate into layers over time.
1
8.
Any characteristic of a material that can be observed or measured without changing the composition of the substances in the material.
Any characteristic of a material that can be observed or measured without changing the composition of the substances in the material.
PAGE 2 : Summary of our chapter from the text book regarding this unit. It contains
almost everything you need yet nicely summed up!! Don't forget to write it down if you don't know it.
1
9.
The tendeny of a liquid to keep from flowing ( How thick or thin it is)
The tendeny of a liquid to keep from flowing ( How thick or thin it is)
1
10.
A material's ability for allowing heat to flow (likely electricity too)
A material's ability for allowing heat to flow (likely electricity too)
1
11.
The ability of a solid to be hammered without shattering.
The ability of a solid to be hammered without shattering.
1
12.
The temperature at which a substance changes from a solid to a liquid.
The temperature at which a substance changes from a solid to a liquid.
1
13.
The ratio of the mass of a substance to it's volume (D=m/v)
The ratio of the mass of a substance to it's volume (D=m/v)
1
14.
Two common ways to get substances apart.
Two common ways to get substances apart.
1
15.
Separates materials based on the size of their particles.
Separates materials based on the size of their particles.
1
16.
Separates materials based on the size of their boiling points.
Separates materials based on the size of their boiling points.
1
17.
This is observed only when the substances in a sample of matter are changing into different substances.
This is observed only when the substances in a sample of matter are changing into different substances.
1
18.
A material's ability to burn in the presence of oxygen.
A material's ability to burn in the presence of oxygen.
1
19.
The property that describes how readily a substance combines chemically with other substances.
The property that describes how readily a substance combines chemically with other substances.
1
20.
Which of the following IS a sign of a chemical change?
Which of the following IS a sign of a chemical change?
1
21.
Which of the following IS a sign of a chemical change?
Which of the following IS a sign of a chemical change?
1
22.
Which of the following IS a sign of a chemical change?
Which of the following IS a sign of a chemical change?
1
23.
When a solid separates from a liquid during a chemical change a _____ will form.
When a solid separates from a liquid during a chemical change a _____ will form.
Kind of elementary but clearly describes atoms vs molecules and more!! Woth the watch.
READ, READ, READ AND STUDY THIS AND YOU WILL UNDERSTAND HOW TO CLASSIFY MATTER!! Any concepts ARE quiz worthy.
Classification of Matter
Once the physical and chemical properties of matter are determined, those properties aid scientists in classifying matter into about six different categories. To determine which of the six different categories the particular matter that is under investigation belongs to, it is helpful to ask a series of questions:
1. Is the matter uniform in composition?
To be uniform in the composition, matter must be made up of all the same atoms, or different atoms always combined in the same ratio. If matter is uniform in composition, then it is classified as a pure substance. If matter is not uniform in composition (different atoms in different ratios), then it is classified as a mixture of pure substances.
Because a mixture is a physical mix of pure substances, it must be separable by physical means, as in distillation, chromatography, using a magnet, filtration, or even using your fingers.
2. If the matter is a substance, is it composed of one single type of atom?
Pure substances are uniform in composition, meaning it is either composed of only one single type of atom, called an element, or composed of different atoms always combined in the same ratio, called compounds. Compounds usually have very different properties than the elements that actually compose it. For example, sodium metal is explosive in water and chlorine gas is very poisonous, but the compound of sodium chloride is a white, crystalline solid that is necessary for the human body.
Elements cannot be broken down any further by chemical means. It takes nuclear reactions to break open an atom. However, compounds can be broken down into the elements that compose it by chemical means.
3. If the matter is a mixture, is the mixing uniform?
Mixtures of pure substances are classified by the extent that the mixture is uniformly composed. There are two types of mixtures; homogeneous and heterogeneous. The Greek words “homo” means “same” and “hetero” means “different”. Thus, a homogeneous mixture is where all components are in the same phase, like in a well-made glass of iced tea. In contrast, the components of a heterogeneous mixture are in different phases with an obvious boundary (interface) between the phases, like in fresh-squeezed orange juice where the pulp settles to the bottom.
Homogeneous mixtures are also called solutions, and if something is a solution, it must be a homogeneous mixture. Solutions have completely even mixing of the components, and do not necessarily have to be a liquid. Bronze is an example of a solid solution, and air is an example of a gaseous solution.
4. If the mixture is a solution, which parts are the solute and solvent?
When a homogeneous mixture is being made, least two pure substances are needed. One of the substances dissolves the other to form the solution. The substance being dissolved is called the solute, and the substance doing the dissolving is called the solvent. Sometimes it’s easy to tell which is which – to make lemonade, lemon juice and sugar are both dissolved by water so therefore the lemon juice and sugar are the solutes and water is the solvent. Other times it’s difficult to tell – ethyl alcohol will dissolve completely in any amount of water, and water will dissolve completely in any amount of ethyl alcohol. The rule of thumb is that the substance in greatest amount is considered the solvent. Anything else by default is considered solute.
5. If the mixture is heterogeneous, does it settle?
Heterogeneous mixtures have parts that are noticeably different because they are in different phases. Sometimes these parts settle, like a bucket of muddy water, and sometimes the different parts don’t settle, like smog.
If the particles are large enough that settling will occur, if given enough time, then the heterogeneous mixture is considered a suspension. Any food that states "Shake Well Before Using" is guaranteed to be a suspension.
If the particles do not settle after an appreciably amount of time, then it is a special type of suspension called a colloidal suspension.
When you observe a mixture and only one phase is present, then it is a solution; when two or more phases are present, then the mixture is considered to be heterogeneous. You can see the phases because they usually meet at a well-defined interface, oil and vinegar salad dressing.
One of the definitional ways to tell if a heterogeneous mixture is a colloid is using the Tyndall Effect. Colloids will scatter light, allowing a beam to be seen in the colloid; a solution will not show the beam of light; and often suspensions will completely block out the light.
Great sample of a Classification of Matter Flow Chart. You should make sure you have a copy of a flow chart in your notes as well. I will be checking to see your DETAILED copy. You may have already started your flow chart from a previous lesson.... no matter what you will want to a detailed copy somewhere in your notes.
Classification of Matter work sheet. Notice that there are 3 types of matter
used for examples. There are triangles (T), squares (Sq) and Rounds (R) each
representing an example of differing atoms.
1
24.
What does this block represent?
What does this block represent?
1
25.
What does this block represent?
What does this block represent?
1
26.
What does this block represent?( reminder... choose the BEST answer!!) Read
carefully.
What does this block represent?( reminder... choose the BEST answer!!) Read
carefully.
1
27.
This block is full of
This block is full of
1
28.
This block contains
This block contains
1
29.
This block contains
This block contains
1
30.
This block contains a
This block contains a
1
31.
This block contains a sample of
This block contains a sample of
1
32.
This block contains
This block contains
Follow the directions EXCEPT do not write... use your multiple choice options
1
33.
This is a pure substance
This is a pure substance
1
34.
This is a(n)
This is a(n)
1
35.
This is a pure substance
This is a pure substance
1
36.
This is a(n)
This is a(n)
1
37.
This is a pure substance
This is a pure substance
1
38.
This is a(n)
This is a(n)
1
39.
This is a mixture
This is a mixture
1
40.
This is a(n)
This is a(n)
1
41.
This is a(n)
This is a(n)
1
42.
This is a mixture
This is a mixture
1
43.
This is a pure substance
This is a pure substance
1
44.
For the most part.....This is an example of a(n)
For the most part.....This is an example of a(n)
1
45.
This is a pure substance.
This is a pure substance.
1
46.
This is a pure substance
This is a pure substance
1
47.
This is a pure substance
This is a pure substance
1
48.
This is a pure substance
This is a pure substance
1
49.
This is a pure substance
This is a pure substance
1
50.
This is a pure substance
This is a pure substance
You will need to show me your completion for this section
Try this quia game to determine if you understand the difference between physical and chemical changes.https://www.quia.com/quiz/303980.html?AP_rand=95020001#q20
quia chemical or physical change
Study the cards then play the MATCH game. When you get under 0ne minute or
hopefully less then you can consider it done......You will need to show me your
completion for this sectiontion
Next try these quizlet cards using the following link and use the password : STUDY
https://quizlet.com/121489798/vocabulary-matter-classification-and-physicalchemical-properities-flash-cards/?new
https://quizlet.com/121489798/vocabulary-matter-classification-and-physicalchemical-properities-flash-cards/?new
6
51.
Draw a Bohr model of Boron
Draw a Bohr model of Boron